Zameen Calculator (Convert Feet to Marla, Kanal & Acre)
Enter Lengths
Enter Widths
Select Marla Size
Zameen Calculator turns ft into Marla, Feet into Kanal, and Kanal into Acar
Buying, selling, or measuring land is one of the most important tasks in Pakistan, India, and other South Asian countries. Land size is usually calculated in square feet, and then converted into local units like Marla, Kanal, and Acre. To make this process simple, we developed a Zameen Calculator that automatically converts land measurements into Marla, Kanal, and Acre.
1 Marla = 272.25 square feet
20 Marla = 1 Kanal
8 Kanal = 1 Acre
This article will explain:
- Why this calculator is useful
- The exact formula used
- Step-by-step explanation of the calculation
- Example conversion
- Benefits of using this tool
Why Use a Zameen Calculator & Land Calculator ?
In South Asia, especially Pakistan, India, Nepal, and Bangladesh, land records are usually measured in Marla, Kanal, and Acre instead of only square feet.
- 1 Marla = 272.25 sq. ft (standard size in India, Pakistan, Nepal, Bangladesh)
- 1 Kanal = 20 Marla = 5,445 sq. ft
- 1 Acre = 43,560 sq. ft
When you buy or sell land, you often get four measurements:
- Two lengths (front and back)
- Two widths (left and right)
These values may not always be equal. That’s why the average formula is used to get accurate results.
Formula Used in Zameen Calculator
The calculator is based on a step-by-step formula:
1. Average Length
Total Length = (Length1 + Length2) ÷ 2
This finds the average length of the plot.
2. Average Width
Total Width = (Width1 + Width2) ÷ 2
This finds the average width of the plot.
3. Total Area in Square Feet
Total Feet = Total Length × Total Width
This gives the total land area in square feet.
4. Conversion into Units
- Marla = Total Feet ÷ 272.25
- Kanal = Marla ÷ 20
- Acre = Total Feet ÷ 43,560
Example Calculation
Suppose you have a plot with:
- Length1 = 60 ft
- Length2 = 58 ft
- Width1 = 40 ft
- Width2 = 42 ft
Step 1: Average Length
(60 + 58) ÷ 2 = 59 ft
Step 2: Average Width
(40 + 42) ÷ 2 = 41 ft
Step 3: Total Feet
59 × 41 = 2,419 sq. ft
Step 4: Conversion
- Marla = 2,419 ÷ 272.25 = 8.89 Marla
- Kanal = 8.89 ÷ 20 = 0.44 Kanal
- Acre = 2,419 ÷ 43,560 = 0.055 Acre
✅ So, the plot size is approximately 9 Marla, less than half a Kanal.
Benefits of Zameen Calculator & Land Calculator
✔️ Saves time and avoids manual mistakes
✔️ Works for any plot size (small or large)
✔️ Converts instantly into Marla, Kanal, and Acre
✔️ Helps in real estate buying, selling, and investment
✔️ Easy to use for students, property dealers, and landowners
How to Use the Zameen Calculator
- Enter Length 1 and Length 2 in feet.
- Enter Width 1 and Width 2 in feet.
- Click “Calculate”.
- The tool will show:
- Average Length
- Average Width
- Total Square Feet
- Result in Marla, Kanal, and Acre
FT into Marla – Square Feet to Marla Conversion Guide
What is a Marla?
A Marla is a traditional unit of land measurement commonly used in Pakistan, India, and some other South Asian countries. It is often used in real estate dealings to measure plots, houses, and agricultural land.
The size of one Marla can vary depending on the region, but in most cases in Pakistan,india Nepal and Bangladesh real estate:
- 1 Marla = 272.25 sq. ft (Government standard)
- 1 Marla = 250 sq. ft (some housing societies use this standard)
Because of these differences, it’s important to know which definition your society, city, or housing authority is using before calculating.
FT into Marla Conversion Formula
To convert square feet into marla, you can use the following formula: Marla=Square Feet (ft²)272.25\text{Marla} = \frac{\text{Square Feet (ft²)}}{272.25}Marla=272.25Square Feet (ft²)
(If your area uses 250 sq. ft = 1 marla, then replace 272.25 with 250).
Common Conversions ( ft into Marla )
| Square Feet (ft²) | Marla (Govt. Standard – 272.25 ft²) | Marla (Society Standard – 250 ft²) |
|---|---|---|
| 250 ft² | 0.92 Marla | 1 Marla |
| 272.25 ft² | 1 Marla | 1.09 Marla |
| 500 ft² | 1.83 Marla | 2 Marla |
| 1000 ft² | 3.67 Marla | 4 Marla |
| 2000 ft² | 7.35 Marla | 8 Marla |
| 2722.5 ft² | 10 Marla | 10.9 Marla |
| 5445 ft² | 20 Marla (1 Kanal) | 21.8 Marla |
Quick Tips
- Always confirm whether the 272.25 sq. ft or 250 sq. ft standard is in use.
- In Pakistan, Government records (Patwari, Revenue Dept.) use 272.25 sq. ft per Marla, but housing societies often use 250 sq. ft per Marla.
- For large plots (Kanal, Acre), these small differences can add up.
Why “FT into Marla” is Important
- Helpful for property buyers & sellers who need to quickly calculate plot sizes.
- Useful for real estate agents, investors, and surveyors.
- Essential for anyone comparing land sizes across different housing schemes.
